This home/property has so much potential! It was previously used as a residence and at home large truck mechanic shop. Inside you will find not one, but two large living rooms and a large kitchen to match it. The primary bedroom has an attached primary bathroom and one of the guest bedrooms also has its own bathroom attached to the bedroom. Lots of storage throughout the home. The metal shop is 80' X 80' (6,400 sq/ft) with two open lean-to's adding about 1,200 sq/ft more of covered area! Both front doors are 14' wide and the left doorway is 12.5' high with the right doorway being 13.5' high. There is also a small office space located inside. All built in shelving will remain and insulation is installed behind the shelving areas in the event you want to insulate the rest of the building. The building is set up for 3 phase electricity and Slemco can install but the building is currently running on single phase. Water is plumbed to the inside of the shop and capped with a valve for whoever would like to finish running it throughout the shop. There's an additional barn that was used for horses and chickens.